About TB Lowtone
TB Lowtone is an innovative bass synthesizer app and AUv3 plug-in featuring three analog-simulated, voltage-controlled oscillators with a large variety of waveform algorithms, continuous pulse-width modulation (PWM),...
TB Lowtone is an innovative bass synthesizer app and AUv3 plug-in featuring three analog-simulated, voltage-controlled oscillators with a large variety of waveform algorithms, continuous pulse-width modulation (PWM), Frequency Modulation (FM) and oscillator hard sync, complemented by a voltage-controlled noise synthesizer, parameter modulation a re-designed non-linear voltage controlled filter. TB Lowtone is the world's first bass synthesizer featuring loudness-domain harmonic synthesis, creating deeper, more consistent and production-ready bass sounds compared to conventional synthesizers operating in the (linear) amplitude domain. TB Lowtone also features an AI randomizer that generates new patches with a single click, and which learns from the patches you have already created to generate new, personalized patches! Loudness-domain synthesis Loudness perception of tones and harmonics is known to be highly non-linear and intricately frequency and level dependent. Equal loudness contours, or Fletcher-Munson curves demonstrate this drastic effect for sine tones, which is especially relevant for low frequencies. The loudness of a synthesizer bass note, and all its individual harmonics, will therefore depend strongly on what note you play on your synth's keyboard. To overcome the resulting inconsistencies in loudness and timbre, TB Lowtone features innovative, loudness-domain synthesis algorithms that adjust each harmonic individually to compensate for loudness deviations across frequency. Modulation and FX TB Lowtone provides two extended low-frequency oscillators (X-LFOs) featuring a wide range of waveforms. The LFOs can be beat and key synced, with a configurable onset delay and a specific number of cycles to run. In addition, a conventional ADSR envelope with configurable onset delay is provided. To top if all off, a gate editor designed to quickly put together modern production modulation patterns is available as well to modulate a range of VCO, VCN and VCF parameters. Reverb, chorus, and delay effects and a high-quality peak limiter are provided to produce production-ready sounds. Features: - 3 VCOs plus a VCN featuring a wide range of waveform algorithms - All VCOs support hard sync, pulse-width modulation (PWM) and frequency modulation (FM) - Lots of filter types for spectral shaping - 2 LFOs, one extra envelope and a gate editor for parameter modulation - Pro quality effects (reverb, chorus, delay, peak limiter) - Unique loudness domain synthesis algorithms - A smart randomiser that learns from your patches - AUv3 with resizable UI and dozens of color themes to choose from - Preset management including import and export options - Undo, redo, A/B switching What you should know: - Licenses acquired for this platform are not compatible with other platforms. - Audio Unit (AUv3) extensions require an iPad mini 2, iPad 4 or later models.
Version History This update provides significant workflow, customisation, personalisation and performance improvements: - New MIDI learn function - Improved detection of drag vs click/tap logic for UI elements - Fix an issue with manual entry of automation lane values in certain hosts - New option to enable highlighting of UI elements that accept keyboard input - New option to customize color scheme - Improved undo/redo functionality 1.2.8 May 28 Stability and efficiency improvements 1.2.7 09/29/2025 Stability, compatibility, and efficiency improvements 1.2.6 09/21/2025 Stability and efficiency improvements 1.2.4 06/30/2025 New feature: 16 active program slots that can be changed using MIDI program messages 1.2.3 04/11/2025 Stability and efficiency improvements iOS18 compatibility improvements 1.1.9 10/18/2024 Efficiency and stability improvements 1.1.8 08/29/2024 - Stability and efficiency improvements - Significant reduction in memory consumption - Improved arpeggiator robustness when host is looping 1.1.7 06/06/2024 Efficiency and performance improvements 1.1.4 04/25/2024 New functionality: - New multi-note arpeggiator! - Make VCF response graph interactive for dragging - Add VCO reset option upon key-on events - On-screen piano keyboard now supports channel pressure (drag keys up) and slide gestures - VCO note has new left-right micro edit drag mode for microscopic tuning edits - FX panel is now draggable - New option to modulate Punch amount with key-on velocity - New sustain pedal 'hold' option by double tap on sustain button - New presets! Improvements: - Fixed an issue with legato note handler in certain edge cases - Fix an issue with modulation indicator lighting up when no modulation was present - Fixed a keyboard focus issue with program drag and drop operations - Improved UX for manual entry of slider values - Make tooltips appear faster with larger font 1.1.1 09/03/2023 - Fixed an editor focus issue with program drag and drop operations in the program organiser - Improved, more touchscreen-friendly UX for keyboard entry of names and slider values - Reduce time for tooltips to appear - Increase font size of tooltips - Increase certain button sizes - Increase modulation popup window slider spacing - Add 'reset all modulations' button in modulation popup window - Fix an issue with the modulation indicator lighting up when no modulation was active - Added 'Default' settings preset in the preset list - Make VCF graph interactive (can now drag on the figure to modify filter Q and cut-off) - Add new VCO phase reset option upon key-on events - Fixed an issue in the legato note handler in case many notes had key-on states simultaneously 1.0.1 06/29/2023 1.0.0 06/24/2023
Previous Versions
Here you can find the changelog of TB Lowtone since it was posted on our website on 2023-06-27 12:53:06.
The latest version is 1.2.8 and it was updated on 2026-10-14 20:15:47. See below the changes in each version.
TB Lowtone version 1.2.8
Updated At: 2026-10-14
Changes: Version History This update provides significant workflow, customisation, personalisation and performance improvements:
- New MIDI learn function
- Improved detection of drag vs click/tap logic for UI elements
- Fix an issue with manual entry of automation lane values in certain hosts
- New option to enable highlighting of UI elements that accept keyboard input
- New option to customize color scheme
- Improved undo/redo functionality 1.2.8 May 28 Stability and efficiency improvements 1.2.7 09/29/2025 Stability, compatibility, and efficiency improvements 1.2.6 09/21/2025 Stability and efficiency improvements 1.2.4 06/30/2025 New feature: 16 active program slots that can be changed using MIDI program messages 1.2.3 04/11/2025 Stability and efficiency improvements
iOS18 compatibility improvements 1.1.9 10/18/2024 Efficiency and stability improvements 1.1.8 08/29/2024 - Stability and efficiency improvements
- Significant reduction in memory consumption
- Improved arpeggiator robustness when host is looping 1.1.7 06/06/2024 Efficiency and performance improvements 1.1.4 04/25/2024 New functionality:
- New multi-note arpeggiator!
- Make VCF response graph interactive for dragging
- Add VCO reset option upon key-on events
- On-screen piano keyboard now supports channel pressure (drag keys up) and slide gestures
- VCO note has new left-right micro edit drag mode for microscopic tuning edits
- FX panel is now draggable
- New option to modulate Punch amount with key-on velocity
- New sustain pedal 'hold' option by double tap on sustain button
- New presets!
Improvements:
- Fixed an issue with legato note handler in certain edge cases
- Fix an issue with modulation indicator lighting up when no modulation was present
- Fixed a keyboard focus issue with program drag and drop operations
- Improved UX for manual entry of slider values
- Make tooltips appear faster with larger font 1.1.1 09/03/2023 - Fixed an editor focus issue with program drag and drop operations in the program organiser
- Improved, more touchscreen-friendly UX for keyboard entry of names and slider values
- Reduce time for tooltips to appear
- Increase font size of tooltips
- Increase certain button sizes
- Increase modulation popup window slider spacing
- Add 'reset all modulations' button in modulation popup window
- Fix an issue with the modulation indicator lighting up when no modulation was active
- Added 'Default' settings preset in the preset list
- Make VCF graph interactive (can now drag on the figure to modify filter Q and cut-off)
- Add new VCO phase reset option upon key-on events
- Fixed an issue in the legato note handler in case many notes had key-on states simultaneously 1.0.1 06/29/2023 1.0.0 06/24/2023
TB Lowtone version 1.2.7
Updated At: 2025-09-29
Changes: Stability and efficiency improvements
TB Lowtone version 1.2.7
Updated At: 2025-09-29
Changes: Sep 29, 2025
Version 1.2.7
Stability and efficiency improvements
TB Lowtone version 1.2.4
Updated At: 2025-06-30
Changes: Jun 30, 2025
Version 1.2.4
Stability and efficiency improvements
TB Lowtone version 1.2.3
Updated At: 2025-04-11
Changes: Apr 11, 2025
Version 1.2.3
New feature: 16 active program slots that can be changed using MIDI program messages
TB Lowtone version 1.1.9
Updated At: 2024-10-18
Changes: Oct 18, 2024
Version 1.1.9
Stability and efficiency improvements
iOS18 compatibility improvements
TB Lowtone version 1.1.8
Updated At: 2024-08-29
Changes: Aug 29, 2024
Version 1.1.8
Efficiency and stability improvements
TB Lowtone version 1.1.7
Updated At: 2024-06-06
Changes: Jun 6, 2024
Version 1.1.7
- Stability and efficiency improvements
- Significant reduction in memory consumption
- Improved arpeggiator robustness when host is looping
TB Lowtone version 1.1.4
Updated At: 2024-04-25
Changes: Apr 25, 2024
Version 1.1.4
Efficiency and performance improvements
TB Lowtone version 1.1.1
Updated At: 2023-09-03
Changes: Sep 3, 2023
Version 1.1.1
New functionality:
- New multi-note arpeggiator!
- Make VCF response graph interactive for dragging
- Add VCO reset option upon key-on events
- On-screen piano keyboard now supports channel pressure (drag keys up) and slide gestures
- VCO note has new left-right micro edit drag mode for microscopic tuning edits
- FX panel is now draggable
- New option to modulate Punch amount with key-on velocity
- New sustain pedal 'hold' option by double tap on sustain button
- New presets!
Improvements:
- Fixed an issue with legato note handler in certain edge cases
- Fix an issue with modulation indicator lighting up when no modulation was present
- Fixed a keyboard focus issue with program drag and drop operations
- Improved UX for manual entry of slider values
- Make tooltips appear faster with larger font
Disclaimer
Official App Store Link
We do not host TB Lowtone on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for TB Lowtone is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.